|
Welcome
to the world of natural well-being!
AROMA DIFFUSER BIOS 300 ROCK
AROMA DIFFUSER BIOS 300 PUMP
 AROMA
DIFFUSER BIOS 300 TECHNO
AROMA DIFFUSER BIOS 300 ROCK
AROMA DIFFUSER BIOS 300, imported from
Germany by STYX Naturcosmetics USA, functions on the principle of cold
vaporization. This system preserves the quality of the essential oils and
assures an acoustic comfort. It is easy to use and to maintain.
Some features of our BIOS air pump
-
Capacity 300 liters of air / hour
-
Pressure: + / - 0,32 bar
-
Power
performance : 5 watt
-
EC
certificate
The pieces of the diffuser
The pump, with variable power, connects
directly to the 110 V electric plug.
Instructions for use
1. Filling the “Bios” aroma diffuser
-
Pour the
oil carefully through the opening of the glass, taking care not to spill the
liquid outside. Use a paper handkerchief.
-
The top
level of the oil must stay under the filaments inside the glass. The ideal
level, without risk of overfilling, is half of the height of the interior
filaments.
-
Some
glasses are equipped with a maximum filling level indicator (blue point)
2. Starting up of the “Bios”
-
Plug the
aroma diffuser “Bios” in. You can switch on or off or adjust the power of the
diffuser with the button on the side.
3. Change of essential oil
-
Empty
the glass without disassembling.
-
Clean
the inside of the glass always with alcohol while taking care not to exceed
the height of the filaments inside the diffuser (up to the blue point if
provided). Then switch on the diffuser for a few minutes after discarding the
alcohol.
-
Fill
with fresh oil.
4. Maintenance and Cleaning
-
As for
every electric device it is necessary to avoid humidity.
-
To get a
better diffusion clean the instrument every 3-4 weeks as explained before.
Then run it for 20 minutes while pressing your finger from time to time on the
opening of the glass. This will allow you to verify that the air is expelled
of the interior filaments of glass. You will feel a small aspiration on your
finger. Finally, clean up.
-
If the
spray diffuser is very dirty, disassemble the glass and let it soak for 24
hours in a solution of ammonia (3/4 of water for 1/4 ammonia water). Avoid to
breathe the vapors of this solution.
-
Under
the motor is an air filter that needs to be changed according to the degree of
contamination. To obtain spare filters, please call us.
| 
